Three grey hats with an argyle knit texture and colourful pom-poms lie in the snow.

 

Bute is a textured latticework hat inspired by the peaks and valleys of Vancouver’s coastal mountain ranges. Sized to fit a woman’s head and worked with Cascade 220, it’s a quick knit that will keep you warm no matter which of our local hills you’re frolicking around on. 

Finished Dimensions:

17 finished circumference,  will comfortable stretch to fit a head up to 25″ in circumference

This should fit an average woman’s head. For a larger or smaller size, either increase or decrease your cast-on by a multiple of 16 or choose larger/smaller needles to modify your gauge.

Needles:

  • one 16″ circular needle in size needed to obtain gauge (suggested 4.5mm)
  • one 16″ circular needle one size smaller than first needle (suggested 3.5mm)
  • one set double pointed needles in size needed to obtain gauge

Additional Tools:

stitch marker

pom-pom maker

Gauge:

22 stitches per 4 inches in lattice pattern, after blocking

Materials:

  • 143 yards of worsted weight yarn (1 ball Cascade 220 shown here in Jet, Charcoal Grey, and Silver Grey)
  • optional 33 yards of contrasting worsted weight yarn for pom-pom (1 ball Cascade 220 shown here in Straw, Lavender Heather, and Nebula Heather)

Abbreviations:

K: knit

P: purl

C1F: slip one stitch to cable needle, hold in front of work, knit one, knit one from cable needle (left leaning cable)

C1B: slip one stitch to cable needle, hold behind work, knit one, knit one from cable needle (right leaning cable)

K2tog: knit two together (right leaning decrease)

SSK: slip slip knit (left leaning decrease)

P2tog: purl two together

Special Instructions:

To keep the lattice running continuously around the circumference of the hat, pay special attention to the transition between the last C1F on Row 6 of the pattern and the first C1B on row 7 especially if you are working solely from the chart; the second to last stitch of Row 6 will be a part of both of these cables and thus requires the following steps once you reach this point. Once you come to the last two stitches of Row 6:

  1. slip 1 stitch to cable needle and hold in front of work
  2. knit 1 (this was originally the last stitch of Row 6)
  3. remove beginning of round marker
  4. move cable needle to back of work
  5. knit first stitch of Row 7 (this now becomes the last stitch of Row 6)
  6. place marker
  7. knit one from cable needle (this now becomes the first stitch of Row 7)

When you reach the end of Row 7, the last stitch was already crossed over as part of this transition so you can knit the last 7 stitches before the marker and continue on with Row 8 as normal. These instructions are included within the written pattern in slightly less detail than above. If this seems convoluted, try to think of it as a braid.

Brim:

Using smaller needles, cast-on 96 stitches. Place marker and join to work in the round, being careful not to twist. Work 15 rows of modified rib.

Modified rib: *K2, P1, K2, P1, K1, P1 repeat from * to end of round

Body:

Switch to larger needles and work rows 1-12 three times:

Row 1: *K3, C1F, K3 repeat from * to end of round 

Row 2: *P2, C1B, C1F, P2 repeat from * to end of round

Row 3: *P2, K4, P2 repeat from * to end of round

Row 4: *P1, C1B, K2, C1F, P1 repeat from * to end of round

Row 5: *P1, K6, P1 repeat from * to end of round

Row 6: *C1B, K4, C1F repeat from * to 2 stitches before end of round. Place next stitch on cable needle and hold in front, K1, remove marker, move cable needle to back of work, K1, place marker

Row 7: K1 from cable needle, K6, *C1B, K6 repeat from * to 1 stitches before end of round, K1

Row 8: *C1F, P4, C1B repeat from * to end of round

Row 9: *K2, P4, K2 repeat from * to end of round

Row 10: *K1, C1F, P2, C1B, K1 repeat from * to end of round

Row 11: *K3, P2, K3 repeat from * to end of round

Row 12: *K2, C1F, C1B, K2 repeat from * to end of round

Work rows 1-6 one more time

Crown:

Continue working in the round, switching to DPNs once the decreases cause the circumference of the hat to become too small to continue on your circular needles.

Row 1: K1 from cable needle *SSK, K2, K2tog, C1B, K6, C1B repeat from * to 1 stitch before end of round ending after K6, K1 (12 stitches decreased, 84 stitches remain)

Row 2: *C1F, P2, C1B, C1F, P2tog twice, C1B repeat from * to end of round (12 stitches decreased, 72 stitches remain)

Row 3: *K2, P2tog, K4, P2tog, K2 repeat from * to end of round (12 stitches decreased, 60 stitches remain)

Row 4: *K1, K2tog, K4, SSK, K1 repeat from * to end of round (12 stitches decreased, 48 stitches remain)

Row 5: *K2tog repeat from * to end of round (24 stitches decreased, 24 stitches remain)

Row 6: *K2tog repeat from * to end of round (12 stitches decreased, 12 stitches remain)

Row 7: *K2tog repeat from * to end of round (6 stitches decreased, 6 stitches remain)

Cut working yarn and thread it through remaining stitches to bind off. Make sure to block your hat to help it have a soft drape, I would recommend shaping it around something round like a bowl to give it some shape. Then weave in ends and attach the optional pom-pom and you’re ready to go!

RAVELRY LINK

Three grey hats with alternating knit cables and colourful pom-poms lie in the snow.

 

Davie’s alternating cables are representative of the Vancouver shoreline and the various ebbs and flows that make up our day to day lives. Sized to fit a woman’s head and worked with Cascade 220, it’s a quick knit that will keep you warm during walks along the seawall and windy trips to the dog beach.

Finished Dimensions:

16″ finished circumference, will comfortable stretch to fit a head up to 25″ in circumference

This should fit an average woman’s head. For a larger or smaller size, either increase or decrease your cast-on by a multiple of 24 or choose larger/smaller needles to modify your gauge.

Needles:

  • one 16″ circular needle in size needed to obtain gauge (suggested 4.5mm)
  • one 16″ circular needle one size smaller than first needle (suggested 3.5mm)
  • one set double pointed needles in size needed to obtain gauge

Additional Tools:

stitch marker

pom-pom maker

Gauge:

24 stitches per 4 inches in cable pattern, after blocking

Materials:

  • 137 yards of worsted weight yarn (1 ball Cascade 220 shown here in Jet, Charcoal Grey, and Silver Grey)
  • optional 33 yards of contrasting worsted weight yarn for pom-pom (1 ball Cascade 220 shown here in Straw, Lavender Heather, and Nebula Heather)

Abbreviations:

K: knit

P: purl

C10F: slip 5 stitches onto cable needle and hold in front of work, knit 5 stitches from left needle, knit 5 stitches from cable needle (left leaning cable)

K2tog: knit two together (right leaning decrease)

SSK: one by one slip the next two stitches knitwise onto right needle, put them back onto left needle and k2tog (left leaning decrease)

P2tog: purl two together

P3tog: purl 3 together

Brim:

Using smaller needles, cast on 96 stitches. Place marker and join to work in the round, being careful not to twist. Work 15 rows of ribbing

Rib: *K2, P2 repeat from * to end of round

Body:

Switch to larger needles and work rows 1-18 two times:

Row 1-5: *K10, P2, K10, P2 repeat from * to end of round

Row 6: *K10, P2, C10F, P2 repeat from * to end of round

Row 7-11: *K10, P2, K10, P2 repeat from * to end of round

Row 12: *K10, P2, C10F, P2 repeat from * to end of round

Row 13-17: *K10, P2, K10, P2 repeat from * to end of round

Row 18: *C10F, P2, K10, P2 repeat from * to end of round

Crown:

Continue working in the round, switching to DPNs once the decreases cause the circumference of the hat to become too small to continue on your circular needles.

Row 1: *SSK, K6, K2tog, P2, K10, P2 repeat from * to end of round (8 stitches decreased, 88 stitches remain)

Row 2: *SSK, K4, K2tog, P2, K10, P2 repeat from * to end of round (8 stitches decreased, 80 stitches remain)

Row 3: *SSK: K2, K2tog, P2, K10, P2 repeat from * to end of round (8 stitches decreased, 72 stitches remain)

Row 4: *SSK, K2tog, P2tog, K10, P2tog repeat from * to end of round (12 stitches decreased, 60 stitches remain)

Row 5: *K2tog, P1, SSK, K6, K2tog, P1 repeat from * to end of round (12 stitches decreased, 48 stitches remain)

Row 6: *K1, P1, SSK, K4, K2tog, P1 repeat from * to end of round (8 stitches decreased, 40 stitches remain)

Row 7: *P3tog, SSK, K2, P2tog repeat from * to end of round (16 stitches decreased, 24 stitches remain)

Row 8: *K2tog repeat from * to end of round (12 stitches decreased, 12 stitches remain)

Cut working yarn and thread it through remaining stitches to bind off. Make sure to block your hat to help it have a soft drape, I would recommend shaping it around something round like a bowl to give it some shape. Then weave in ends and attach the optional pom-pom and you’re ready to go!

RAVELRY LINK

Three grey hats with a knit chevron texture and colourful pom-poms lie in the snow.

Thurlow’s ribbed chevron motif is inspired by the trees that line Vancouver’s streets and fill its surrounding forests. Sized to fit a woman’s head with a bit of slouch and worked with Cascade 220, it’s a quick knit that will keep you warm as this year’s long cold winter drags on.

Finished Dimensions:

17″ finished circumference, will comfortable stretch to fit a head up to 24″ in circumference

This should fit an average woman’s head with a bit of slouch. If you’d like a snug fit, I’d recommend adding a few extra rows of ribbing at the beginning and folding the brim up. For a larger or smaller size, either increase or decrease your cast-on by a multiple of 14 or choose larger/smaller needles to modify your gauge.

Needles:

  • one 16″ circular needle in size needed to obtain gauge (suggested 4.5mm)
  • one 16″ circular needle one size smaller than first needle (suggested 3.5mm)
  • one set double pointed needles in size needed to obtain gauge

Additional Tools:

stitch marker

pom-pom maker

Gauge:

22 stitches per 4 inches in chevron pattern, after blocking

Materials:

  • 145 yards of worsted weight yarn (1 ball Cascade 220 shown here in Jet, Charcoal Grey, and Silver Grey)
  • optional 33 yards of contrasting worsted weight yarn for pom-pom (1 ball Cascade 220 shown here in Straw, Lavender Heather, and Nebula Heather)

Abbreviations:

K: knit

P: purl

K2tog: knit two together (right leaning decrease)

SSK: slip slip knit (left leaning decrease)

P2tog: purl two together

Brim:

Using smaller needles, cast-on 98 stitches. Place marker and join to work in the round, being careful not to twist. Work 15 rows of ribbing (if you’d like a hat that fits more snugly I would recommend knitting an extra 3-5 rows of ribbing so you can fold the brim up.)

Rib: *K1, P1 repeat from * to end of round

Body:

Switch to larger needles and work rows 1-14 three times:

Row 1 & 2: *K1, P5, K2, P5, K1 repeat from * to end of round

Row 3 & 4: *K2, P4, K2, P4, K2 repeat from * to end of round

Row 5 & 6: *K3, P3, K2, P3, K3 repeat from * to end of round

Row 7 & 8: *K1, P1, K2, P2, K2, P2, K2, P1, K1 repeat from * to end of round

Row 9 & 10: *K1, P2, K2, P1, K2, P1, K2, P2, K1 repeat from * to end of round

Row 11 & 12: *K1, P3, K6, P3, K1 repeat from * to end of round

Row 13 & 14: *K1, P4, K4, P4, K1 repeat from * to end of round

Crown:

Continue working in the round, switching to DPNs once the decreases cause the circumference of the hat to become too small to continue on your circular needles.

Row 1: *K1, P2tog, P3, K2, P3, P2tog, K1 repeat from * to end of round (14 stitches decreased, 84 stitches remain)

Row 2: *K1, P4, K1 repeat from * to end of round

Row 3: *K1, P2tog, P2, K2, P2, P2Tog, K1 repeat from * to end of round (14 stitches decreased, 70 stitches remain)

Row 4: *K1, P3, K1 repeat from * to end of round

Row 5: *K1, P2tog, P1, K2, P1, P2tog, K1 repeat from * to end of round (14 stitches decreased, 56 stitches remain)

Row 6: *K1, P2, K1 repeat from * to end of round

Row 7: *SSK, K2tog repeat from * to end of round (28 stitches decreased, 28 stitches remain)

Row 8: K to end of round

Row 9: *K2tog, K1 repeat from * until two stitches remain, K2tog (10 stitches decreased, 18 stitches remain)

Row 10: K2tog to end of round (9 stitches decreased, 9 stitches remain)

Cut working yarn and thread it through remaining stitches to bind off. Make sure to block your hat to make the ribbing lie flat and reveal the chevron texture. Then weave in ends and attach the optional pom-pom and you’re ready to go!

RAVELRY LINK

A collection of grey knit hats with colourful pompoms that are arranged in a circle in the snow

 

I moved back to Vancouver in October after spending the summer doing resort work in the mountains. I grew up in this city, and I love it for numerous reasons, but Autumn can be a hard season for me here. After a few months away I grew used to the greenery of trees all around me and the blue of the sky reflected in the crystal clear lakes; moving away from all that during two of the most wet and most grey months on record took some getting used to. Vancouverites love to complain, and we especially love to complain about the weather, but I know that when I get caught in that downward spiral it just makes me miserable. Instead I tried to make a conscious effort this year to pay attention to the things that brightened the grey days. One thing I noticed was that the monotone nature of the city during these rainy months made the changing leaves on the trees and the sunshine slipping through the clouds stand out in contrast.

It was around October that I started thinking seriously about the idea behind Steady Hands Co as well. I think this collection, which I’m calling Autumn in the City, is representative of this attitude. 

 

 

Don’t get me wrong, the fall and winter months can be depressing, but I actually really like the colour grey. A large majority of my wardrobe is monochromatic and with the exception of socks I gravitate to all shades of grey when I pick out yarn for my own personal projects. I wanted this collection to be a love letter to all aspects of Autumn in Vancouver so I designed three different toques that were inspired by the city’s natural surroundings and I knit them up in three different shades of grey. They’re topped off with three contrasting choices of pom-poms as well, in order to bring a pop of colour to brighten even the darkest of days.

Three grey knit hats with an argyle cable pattern and colourful pom-poms lying in the snow

The first design is called Bute, and this hat features an interwoven trellis pattern that is reminiscent of the coastal mountain range that looms over Vancouver’s skyline. Winter’s first sighting of snow-capped peaks through a break in the clouds is one of my favourite days of the year; the proximity to the mountains is such an important and iconic part of Vancouver to me, so I knew I needed something to represent them when I was putting together this collection. I love the way Bute turned out, the texture is simple and classic while the modified ribbing adds a bit of playfulness. It’s sized to hug the average woman’s head with just a touch of slouch.

Three grey knit hats with ribbing that resembles a chevron pattern and colourful pom-poms are lying in the snow.

The second design is called Thurlow, and this hat’s ribbed chevron motif is inspired by the trees that line Vancouver’s streets and fill its surrounding forests. Our coastal rain forests are full of stories and history and I cannot imagine living somewhere that wasn’t surrounded by these green expanses. Being able to get lost between the trees even within the city limits is something that’s unique and wonderful. The simple repeating pattern is the slouchiest of the three designs and the result is a toque that fits the average woman’s head with a bit of room to scrunch down over your ears.

Three grey knit hats with alternating cable patterns and colourful pom-poms are lying in the snow.

The third and final design is called Davie; its alternating cables are representative of the Vancouver shoreline and the ebbs and flows that make up our day to day lives. Like many other Vancouverites, living in a coastal city is a defining feature of many of my days. I often take the SeaBus as a form of public transit, I grew up going for jogs along the banks of the Fraser River, and I have a tattoo of one of the bridges that leads into the heart of downtown. I chose two different cables for this toque to span from larger expanses like the Howe Sound and the Straight of Georgia to the small lakes and rivers that wind throughout the city. It’s designed to fit the average woman’s head with just a touch of slouch.

The patterns for these toques are available for free so that you can knit your own. You can choose a contrasting pom-pom or go without if you’re a purist. Here are some closer shots to show you how each style looks with each colour:

Three light grey hats with varying knit textures and colourful pom-poms are lying in the snow.

In “Pebble” which is a light grey colour, pictured from left to right: 

  • The Bute Hat with a Lilac pom-pom
  • The Davie Hat with a Merlot pom-pom
  • The Thurlow Hat with a Goldenrod pom-pom

Three charcoal grey hats with varying knit textures and colourful pom-poms are lying in the snow.

In “Charcoal” which is a medium grey colour, pictured from left to right:

  • The Davie Hat with a Lilac pom-pom
  • The Bute Hat with a Goldenrod pom-pom
  • The Thurlow Hat with a Merlot pom-pom

Three dark grey hats with varying knit textures and colourful pom-poms are lying in the snow.

In “Asphalt” which is a dark grey colour, pictured from left to right: 

  • The Davie Hat with a Goldenrod pom-pom
  • The Bute Hat with a Merlot pom-pom
  • The Thurlow Hat with a Lilac pom-pom

FIND PATTERNS NOW

This collection is a love letter to the city in which I grew up and currently live, so I think that it’s important to acknowledge that Vancouver sits on the unceded territory of the Musqueam, Squamish, and Tseil-Waututh peoples.